Language English
Polski
Deutsch
Slovenský
Latviešu
Українська
Magyar
Hrvatski
Lietuvių
Română
Český
Български
Italiano
Sporočilolovaščina
Русский
Ελληνικά
Eesti
Français
NederlandsSteering Gear Hydraulic Pump
Technical condition requirements for removed power steering pumps
1.The external housing, the housing mounting brackets and the screw holes must not be cracked or deformed.
2. The moving mechanisms (axles) must not be seized/blocked.
3. The threaded holes must not be damaged or sheared.
4. The pump must not be strongly corroded (violation of the stability of the structure). 5. Pumps supplied with a pulley must be returned with an undamaged pulley.
6. Pumps with tanks must be equipped with a plug, the tank must not be cracked, and the piping must not be broken.
7. The manufacturer number of the returned part on the housing must be legible and consistent or interchangeable with the index of the purchased part.
8. The ZF-manufacturer label is required.
9. If there is no label, the core may be returned in the original packaging with index.
Unacceptable examples
Complete core, no signs of disassembly - required Core complete, without traces of disassembly - required
No shaft - unacceptable
No balls - unacceptable
Incomplete core - unacceptable
Incomplete core - unacceptable
Damaged pulley - acceptable
Damaged pulley - acceptable
Shaft turns with difficulty or does not turn at all - unacceptable
Shaft turns with difficulty or does not turn at all - unacceptable
Shaft turns with difficulty or does not turn at all - unacceptable
Corrosion - unacceptable
The manufacturer's number on the part (starting e.g. with 76..955...) or the Bosch spare part number (starting with e.g. 76... or KS...) on the Bosch spare part number or part number (starting with e.g. 76... or KS...) on the box (as an auxiliary)
Damaged wedge / thread - unacceptable
