< back

Clutch Kit

Technical condition requirements for clutch kits:

The supplier requires that the core is returned in its original packaging - a mandatory requirement.

1. The clutch housing cannot be cracked, broken or deformed.

2. The clutch disc cannot be severely corroded or overheated.

3. The index of the returned core must comply with the index of the purchased final product.

4. Acceptable single disc clutch kits for commercial vehicles with diameters:

• 362 mm

• 380 mm

• 395 mm

• 405 mm

• 430 mm

AD 4. Clutch kits that are not accepted are:

• Single disc clutch kits with a diameter of less than 362 mm

• Double disc sets 2x380 mm or 2x400 mm

Unacceptable examples

Light / surface corrosion - acceptable

---

Damaged friction material - acceptable

---

Broken or missing vibration dampers - acceptable

---

Severe corrosion - unacceptable

---

Broken / worn out membrane - unacceptable

---

Broken cover assembly - unacceptable

---

Overheated cover assembly - unacceptable

---

Broken disc hub / overheated disc - unacceptable

---

Damaged / broken disc - unacceptable

---