Disc brake clamp
Technical condition requirements for removed disk brake callipers
1. The calliper housing may not be cracked, broken or deformed.
2. The body may not be strongly corroded or burnt out (structure stability disturbance).
3. The screwed holes for fluid and venting may not be deformed; the threads may not be damaged.
4. The calliper shall be complete and not dismantled.
5. The index of the returned calliper must comply with the index of the purchased final product.
6. The motor body of the electric calliper may be cracked, but it must be installed.
Unacceptable examples
Crack of electrical part body
Damage to electrical connection
Deep abrasions - unacceptable
No rips or loss of material
No air vent - unacceptable
Mounted air vent - required
Remains after disassembly, e.g. broken screw - unacceptable
Tapped holes without any disassembly residue - required
Damaged mountings - unacceptable
Mechanical damage, cracks - unacceptable
Damaged fastening holes - unacceptable
Mechanical damage, breakage of protruding elements of the body - unacceptable
Damage to fastenings - unacceptable
Original branding.[_REQUIRED_] -vs- Non-original branding.[_UNACCEPTABLE_]