Jazyk Slovenský

< späť
Nádrž AdBlue - T.TEC

1. Vrátená odstránená časť (jadro) musí byť ekvivalentom zakúpeného produktu podľa vzorca TR predaja. Diel sa odporúča dodať v originálnom balení zakúpeného produktu. Ak originálny obal nie je k dispozícii, vrátený diel musí byť výslovne označený indexom zakúpeného produktu.

2. Podľa predpisov na ochranu životného prostredia musia byť jadrá chránené a zabalené tak, aby nemohli kontaminovať životné prostredie. Demontované diely (napr. prevody posilňovača riadenia, čerpadlá, kompresory klimatizácie) musia byť dodané bez pracovného média. Spoje musia byť uzavreté pomocou zástrčiek, napr. zo zakúpených produktov.

3. Môžeme akceptovať iba kompletné, nerozoberané diely, ktoré spĺňajú technické požiadavky uvedené nižšie.
TURBO TEC

Technical condition requirements for AdBlue tanks

1. The returned core should have the same number as the purchased part or the number of the replacement
       • The ADB00x number is an internal Turbo-Tec number. The OEM number is located on the tank housing.

2. The tank should be complete, i.e. the pumping module cannot be dismantled.

3. The electric bundle (wiring) cannot be removed.

4. Plugs cannot be removed.

5. The metal mounting sleeves cannot be removed.

6. Depending on the model, the heat shield cannot be removed.

7. The plastic spacers cannot be removed.

8. Sink plugs cannot be removed.

9. Regarding mechanical damage/cracks: 
The tanks are made of a material resistant to impact and mechanical damage/cracks. Damage of this nature practically does not occur.

Neakceptovateľné príklady

1. The returned core should have the same number as the part purchased or the number of the replacement

1. The returned core should have the same number as the part purchased or the number of the replacement

2. The tank should be complete, i.e. the pumping module cannot be dismantled

2. The tank should be complete, i.e. the pumping module cannot be dismantled

3. The electric bundle (wiring) cannot be removed

3. The electric bundle (wiring) cannot be removed

4. Plugs cannot be removed

4. Plugs cannot be removed

5. The metal mounting sleeves cannot be removed

5. The metal mounting sleeves cannot be removed

6. Depending on the model, the heat shield cannot be removed

6. Depending on the model, the heat shield cannot be removed

7. The plastic spacers cannot be removed

7. The plastic spacers cannot be removed

8. Sink / Basin plugs cannot be removed

8. Sink / Basin plugs cannot be removed

2024 © Centrum Badawczo Rozwojowe v. 2.18.0
Cookies policy | powered by Lauber Dev Team