Lingua Italiano

< back
Serbatoio AdBlue - T.TEC

1. La parte smontata restituita (core) deve essere equivalente al prodotto acquistato con la formula di vendita TR. Si consiglia di consegnare la parte nella confezione originale del prodotto acquistato. Se l'imballo originale non è disponibile, la parte restituita dovrà essere contrassegnata esplicitamente con l'indice del prodotto acquistato.

2. Secondo le norme sulla protezione dell'ambiente, le anime devono essere protette e imballate in modo tale da non poter contaminare l'ambiente. Le parti smontate (ad es. servosterzi, pompe, compressori del climatizzatore) devono essere consegnate senza fluido di lavoro. I collegamenti devono essere chiusi mediante tappi, ad es. dai prodotti acquistati.

3. Possiamo accettare solo parti complete, non smontate, conformi ai requisiti tecnici di seguito specificati.
TURBO TEC

Technical condition requirements for AdBlue tanks

1. The returned core should have the same number as the purchased part or the number of the replacement
       • The ADB00x number is an internal Turbo-Tec number. The OEM number is located on the tank housing.

2. The tank should be complete, i.e. the pumping module cannot be dismantled.

3. The electric bundle (wiring) cannot be removed.

4. Plugs cannot be removed.

5. The metal mounting sleeves cannot be removed.

6. Depending on the model, the heat shield cannot be removed.

7. The plastic spacers cannot be removed.

8. Sink plugs cannot be removed.

9. Regarding mechanical damage/cracks: 
The tanks are made of a material resistant to impact and mechanical damage/cracks. Damage of this nature practically does not occur.

Unacceptable examples

1. The returned core should have the same number as the part purchased or the number of the replacement

1. The returned core should have the same number as the part purchased or the number of the replacement

2. The tank should be complete, i.e. the pumping module cannot be dismantled

2. The tank should be complete, i.e. the pumping module cannot be dismantled

3. The electric bundle (wiring) cannot be removed

3. The electric bundle (wiring) cannot be removed

4. Plugs cannot be removed

4. Plugs cannot be removed

5. The metal mounting sleeves cannot be removed

5. The metal mounting sleeves cannot be removed

6. Depending on the model, the heat shield cannot be removed

6. Depending on the model, the heat shield cannot be removed

7. The plastic spacers cannot be removed

7. The plastic spacers cannot be removed

8. Sink / Basin plugs cannot be removed

8. Sink / Basin plugs cannot be removed

2024 © Core Bank And Claim Registry v. 2.18.0
Cookies policy | powered by Lauber Dev Team