Vāloda Latviešu

< atpakaļ
AdBlue tvertne - T.TEC

1. Atgrieztajai izņemtajai detaļai (serdenim) jābūt līdzvērtīgai iegādātajai precei pēc TR pārdošanas formulas. Detaļu ieteicams piegādāt iegādātās preces oriģinālajā iepakojumā. Ja oriģinālais iepakojums nav pieejams, atgriežamajai daļai jābūt skaidri marķētai ar iegādātās preces indeksu.

2. Saskaņā ar vides aizsardzības noteikumiem serdeņus aizsargā un iepako tā, lai tie nevarētu piesārņot vidi. Noņemtās daļas (piemēram, stūres pastiprinātāja mehānismi, sūkņi, gaisa kondicionēšanas kompresori) piegādā bez darba vides. Savienojumi jāaizver, izmantojot aizbāžņus, piem. no iegādātajām precēm.

3. Mēs varam pieņemt tikai pilnīgas, nevis demontētas detaļas, kas atbilst tālāk norādītajām tehniskajām prasībām.
TURBO TEC

Technical condition requirements for AdBlue tanks

1. The returned core should have the same number as the purchased part or the number of the replacement
       • The ADB00x number is an internal Turbo-Tec number. The OEM number is located on the tank housing.

2. The tank should be complete, i.e. the pumping module cannot be dismantled.

3. The electric bundle (wiring) cannot be removed.

4. Plugs cannot be removed.

5. The metal mounting sleeves cannot be removed.

6. Depending on the model, the heat shield cannot be removed.

7. The plastic spacers cannot be removed.

8. Sink plugs cannot be removed.

9. Regarding mechanical damage/cracks: 
The tanks are made of a material resistant to impact and mechanical damage/cracks. Damage of this nature practically does not occur.

Neakceptējami piemēri

1. The returned core should have the same number as the part purchased or the number of the replacement

1. The returned core should have the same number as the part purchased or the number of the replacement

2. The tank should be complete, i.e. the pumping module cannot be dismantled

2. The tank should be complete, i.e. the pumping module cannot be dismantled

3. The electric bundle (wiring) cannot be removed

3. The electric bundle (wiring) cannot be removed

4. Plugs cannot be removed

4. Plugs cannot be removed

5. The metal mounting sleeves cannot be removed

5. The metal mounting sleeves cannot be removed

6. Depending on the model, the heat shield cannot be removed

6. Depending on the model, the heat shield cannot be removed

7. The plastic spacers cannot be removed

7. The plastic spacers cannot be removed

8. Sink / Basin plugs cannot be removed

8. Sink / Basin plugs cannot be removed

2024 © Pētniecības-Attīstības centrs v. 2.17.0
Cookies policy | powered by Lauber Dev Team