< späť

Brzdový strmeň tr

Technical condition requirements for removed truck brake callipers

1. The core cannot be mechanically damaged - cut, cracked, deformed. 

2. The core must be complete and unscrewed. 

3. The core cannot be heavily corroded. 

4. The pin socket must not be deformed. 

5. If the clamp is sold with a yoke, the core must also be returned with a yoke.

6. The returned core must not have any slack in the guides (applies to hydraulic clamps only). 

7. Callipers marked / branded as " MEI " will not be accepted.

Neakceptovateľné príklady

Clamp incomplete - not acceptable

---

Incomplete core - unacceptable

---

Fastening of pads (yoke) in hydraulic-pneumatic calipers - required

---

Any looseness on the guides in hydraulic-pneumatic calipers - unacceptable

---

Discalibrated pad mounting - unacceptable

---

Deformed pin seat - unacceptable

---

Mechanical damage - unacceptable

---

Worn and overheated caliper - unacceptable

---

Overheated clamp - unacceptable

---