Мова Українська
English
Polski
Deutsch
Slovenský
Latviešu
Magyar
Hrvatski
Lietuvių
Română
Český
Български
Italiano
Sporočilolovaščina
Русский
Ελληνικά
Eesti
Français
NederlandsDPF Filter
Technical condition requirements for removed DPF Filter
The deposit can only be refunded if all criteria are met:
1. The DPF filter is an OE product or an approved product.
2. The filter visually meets the return requirements.
3. The DPF filter has no traces of soot or black spots on the outlet side.
4. The DPF filter has no traces of thermal discoloration on the housing or traces of melted core.
5. The DPF filter is not oily and has no discoloration or stains.
6. The DPF filter has no cracks, delaminations or cavities and the housing has no dents.
7. The DPF filter cartridge is stably embedded in the housing.
8. The DPF filter is returned in its original packaging.
9. Cores that show signs of chemical damage (stains from fluid, rust, AdBlue(r) and other chemicals) cannot be reconditioned.
10. Cores with significant physical damage to the ceramic substrate cannot be reconditioned (such as: soot on the outlet, melting, cracks or large chips).
11.. Cores in which the ceramic substrate has been displaced (pushed out) are acceptable, provided that the substrate does not show signs of damage as discussed above.
Несхваленні зразки
Black points on the exhaust side may indicate damage to the core wall structure due to overheating
Soot and ash on the inlet side
Clean outlet side
Ring-shaped thermal discoloration indicates serious damage to the filter wall structure or possible partial melting
Soot on the inlet side
Oily DPF core or visible traces of foreign substances on the core
Damage to the DPF core or housing is not accepted - (only superficial scratches or chips are accepted)
