pompei de injecție tip VP, VE, VR

1. The returned removed part (core) must be an equivalent of the purchased product under the TR sale formula. It is recommended to deliver the part in the original packaging of the purchased product. If the original packaging is not available, the returned part must be explicitly marked with the index of the purchased product.2. According to the environment protection regulations, the cores shall be protected and packed in such a way that they cannot contaminate the environment. The removed parts (e.g. power steering gears, pumps, air conditioning compressors) shall be delivered without the working medium. The connections shall be closed using plugs, e.g. from the purchased products.3. We can accept only complete, not dismantled parts which comply with the technical requirements as specified below.
BOSCH CR

Требования, которые относятся к техническому состоянию демонтированных топливных насосов типа VP, VE, VR, установленных в ряд

1. Корпус насоса не должен иметь повреждений, сильных коррозий или пережогов.

2. Пункты крепления и элементы, которые выпирают, не должны быть повреждены.

3. Отсутствие учетных знаков, следов демонтажа элементов насоса.

4. Электрические соединения или вилки не должны быть оборваны или повреждены.

5. Резьбовые соединения не должны иметь повреждений.

6. Поверхности прилегания не должны иметь ни деформаций, ни повреждений.

7. Номер производителя (референтный номер) на корпусе должен быть разборчивым и соответствовать каталожному номеру.

8. Товар должен возвращаться в оригинальных упаковках (касается марки Bosch) .

9. Индекс сердечника должен соответствовать индексу готового изделия.

Unacceptable examples

Missing nut - acceptable

Missing nut - acceptable


Missing nut - acceptable

Missing nut - acceptable


No relief valves - acceptable

No relief valves - acceptable


No relief valves - acceptable

No relief valves - acceptable


No piping connections - acceptable

No piping connections - acceptable


No piping connections - acceptable

No piping connections - acceptable


No DMV11 valve - unacceptable

No DMV11 valve - unacceptable


Damaged housing - acceptable

Damaged housing - acceptable


Damaged thread - acceptable

Damaged thread - acceptable


Damage to cables, e.g. torn cover, cuts, makeshift repairs - acceptable

Damage to cables, e.g. torn cover, cuts, makeshift repairs - acceptable


Cable connected with a cable tie - acceptable

Cable connected with a cable tie - acceptable


Cable modified - acceptable

Cable modified - acceptable


Cable damaged at DMV 10 - acceptable

Cable damaged at DMV 10 - acceptable


Broken plug - acceptable

Broken plug - acceptable


Defective pins - acceptable

Defective pins - acceptable


No connectors - acceptable

No connectors - acceptable


Damaged plug - acceptable

Damaged plug - acceptable


Surface corrosion - acceptable

Surface corrosion - acceptable


Oxidized housing - acceptable

Oxidized housing - acceptable


Painted part - acceptable

Painted part - acceptable


Plate with legible manufacturer numbers - required

Plate with legible manufacturer numbers - required


Slightly damaged plug max. 2mm - acceptable

Slightly damaged plug max. 2mm - acceptable


Part number written with embossed or electrically engraved numbers, no original Bosch marking - unacceptable

Part number written with embossed or electrically engraved numbers, no original Bosch marking - unacceptable


Broken plug - acceptable

Broken plug - acceptable